Two-component, 100% solids content epoxy resin, solvent-free, odorless, which once dry forms a continuous film in concrete, mortar or ceramic substrates increasing adherence for liquid waterproofing and flooring systems Its consumption depends on the situation of the substrate, irregularities that it presents or level of planimetry. It can be applied in a thick layer, self-leveling system Do not use with groundwater pressure (water pressure coming from the back of the treated element. Can be used as an epoxy-mortar, adding Silica Sand or calcium carbonate (mixing ratio in weight 1:4), to fill irregularities. No dilution needed at all.
Features:
- Density: 1.05± 0.1 g/cm3
- Viscosity: 600± 250 cps
- Pot-life: ±30 minutes
- Dry time: ±2~3 hours
- Application method: By brush, by a short nap acrylic wool or notched trowell
For application in the following situations:
- Increase adhesion on on concrete, mortar, or ceramic tiles substrates
- To be used as a resin mortar for concrete substrate or joints of ceramic tiles (adding Silica Sand, or calcium carbonate)
